Fix: Your PC Did Not Start Correctly Message In Windows 10

When the error pops out during Windows boot, you can first try to restart your PC as the error message prompts. If it works, you can save lots of time and energy. If it does not work, you can apply the following methods.

Fix: Your PC did not start correctly message in Windows 10

Download Zip: https://www.google.com/url?q=https%3A%2F%2Fgohhs.com%2F2u8UyW&sa=D&sntz=1&usg=AOvVaw00MJJZhkPt2QDb89KEWtob

Some Windows users have encountered a situation where their operating system crashes unexpectedly and displays the dreaded blue screen of death. There are various underlying causes that can result in a crash, and the system will report different error messages and information. Among the blue screens, 'Your PC ran into a problem and needs to restart' happens most frequently.

Each stop/error code indicates the possible causes of the issue. However, there are various error messages (100+) related to "Your PC ran into a problem and needs to restart". Thus, there are so many reasons why you encounter the error. But I narrow them down to the following factors:

If you are faced with the error, there is a slim chance that your computer will work properly after a restart. In more common situations, your PC will restart and prepare an automatic repair, which generally doesn't work and will show you "Your PC did not start correctly". Or you are just stuck at the "Your PC ran into a problem and needs to restart" loop. Specify your situation and carry out the corresponding fixes to have a try.

Safe Mode is a diagnostic mode of Windows. It starts your PC with the minimal necessary programs and services. In Safe Mode, you can fix some system-related problems by uninstalling incompatible software/driver, deleting problematic files, removing viruses, and more. Even if you do nothing, booting into Safe Mode is useful to repair some system errors by helping the storage system to be reaccessed.

Check the disk is identical to running the CHKDSK command, which is used to fix disk errors like bad sectors and file system errors. If "Your PC ran into a problem and needs to restart" appears with "INACCESSIBLE_BOOT_DEVICE", it may be caused by the file system errors on your hard drive. That's why checking the disk is necessary.

In some cases, your PC will restart and prepare a startup repair automatically after the error message appears, resulting in the "Your PC did not start correctly" screen. Here you can see two options: Restart and Advanced options.

The registry is a database that contains the configuration data for the Windows operating system and most of the applications. That is why changes in the registry may influence the functionality of your computer or programs. Registry files may get deleted accidentally by yourself or by some program. And that could result in serious problems just like "Your PC ran into a problem and needs to restart". Luckily, the changes can be reverted with the registry backup files, which you can complete via Command Prompt.

Unlike either of the two cases above, you have no options available to choose from. All you have is the repeated restart and error circle. In a situation like this, you can either recover data from the corrupted OS or fix the problem with the Windows installation CD/DVD. If you don't have an installation disc, you can create a Windows installation media as a substitute. With the Windows installation media, you can repair your computer via the Advanced options which you have no access to currently.

If you have, unfortunately, lost some files after taking the methods to troubleshoot the 'Your PC ran into a problem and needs to restart' error in Windows 10/11, try the EaseUS Data Recovery Wizard - EaseUS data recovery software to retrieve them. This software can recover files due to deletion, format, system crash, and more. Once data loss is found, launch the software and rescue your files as soon as possible.

The "Your PC ran into a problem and needs to restart" problem is annoying. But with the workable solutions provided here, you should feel relieved because there are still ways to rescue your computer. If you are clear about what leads to your current situation, you can solve the problem in a more direct way. If not, specify your situation and carry out the potential fixes to remove the error.

In some cases, the problem is easily solved by Windows Automatic repair when you restart your system, however, that is not bound to work for everyone. If your error persists even after multiple boots, this means your MBR is corrupted. In such a scenario, you can apply the following solutions to fix your issue.

Getting windows Startup error Your PC did not start correctly after a sudden power failure or upgrading your PC to a newer version? While turning on your computer, instead of booting to Desktop normally, Windows 10 displays an Automatic Repair screen with the message Your PC did not start correctly. As the screen mention itself that if you hit the Restart button, the problem may solve automatically. But if this continues to happen after every reboot, you need to perform additional troubleshooting steps to solve this problem.

As windows is unable to start normally, we need to access advanced options. Where you can get various tools to fix windows Startup problems. Either you can click on Advanced options on the error screen, Or you can follow these steps to access windows Advanced options.

If startup repair is unable to fix the problem, Then try to run the SFC utility that scans and restores missing, corrupted system files. And fix the problem if any corrupted system file causes this startup problem and your pc did not start correctly. To do this again access Advanced options And click on Command prompt. Here on the advanced command prompt type the command sfc /scannow and hit enter key to run system file checker.

The SFC utility check for missing corrupted system files and if found any the utility restore them from a special folder located on %WinDir%\System32\dllcache. Wait until 100% complete the scanning process After that restart the windows and check system start normally on the next boot.

MBR or Master Boot Record is the data that is present in the first sector of any hard disk. It tells where the operating system is located so that it can be loaded. If the Master Boot Record (MBR) file is corrupted this may cause startup problems such as your pc did not start correctly.

After running the DISM command Restart windows and check Windows start normally. If not then we need to repair the BCD Error by performing the following command below. Again open the command prompt from Advanced options and type the command below one by one and hit the enter key to execute the same.

These Are some most applicable solutions to fix the windows automatic repair loop your PC did not start correctly startup error message in Windows 10/8/7. I hope to apply these solutions also fix the problem for you. Still, have any queries or suggestions about this post, face any difficulty while applying the solutions feel free to discuss in the comments below.

Many Windows 10 users are experiencing an issue with their computer. What actually happens is they get a blue screen and an error message that says Automatic Repair: Your PC did not start correctly. A lot of the time, this happens after upgrading to Windows 10.

Think of it as a simple operating system for your motherboard that tells the computer how to start. The BIOS is what you see before your operating system loads, and usually consists of a text menu or a simple interface that allows you to control the basics of your hardware. This includes modifying startup instructions and troubleshooting.

1. Remove external storage. To determine your boot order, restart your system, unplug any external storage or flash drives, and enter the BIOS by pressing the appropriate key during the startup process.

To use your Mac's safe boot option, shut down your Mac, press and hold the Shift key, and start up your Mac. Release the Shift key when you see the login window or desktop.

"So I just updated my laptop to the newest version of windows 11 and I am getting a lot of application errors and auto startup errors for apps. Is there a way to fix this? Error 0xc0000135," a user posted to the Microsoft Answers forum.

"Is anybody running into an error after KB5013628 / KB5013943 - The application was unable to start correctly (0xc0000135) unable to start any .NET 4.8 programs - bing/visual studio etc," explained another user on Twitter.

The 0xc0000135 error indicates that the application failed to find a DLL file required for the program to operate correctly, so the program could not start. In this particular issue, it appears that the application is looking for .NET DLLs and is unable to find them.

My VM Workstation crashed and now I can not get it to start. I have had this happen numerous times in the past and was always able to get it to start by deleting the .lck files but this is not working this time. I do messages like the following in the log file which I have attached.

After following this post, you will be able to solve an issue with Windows 10, where your PC might suddenly restart (OR) might give you an error out of the blue upon restart of power up your Windows 10 based computer. The error reads like: Your PC did not start correctly. This error might also occur after you update or upgrade Windows.

In general, this error can make your desktop or laptop unable unusable and you have to restart your computer. You always get this issue every time you restart the computer. In this case, you can restart the computer in safe mode.

After you restart the computer in Safe Mode, you should check whether there are some errors in all your device drivers. Generally, many blue screen errors like 0x000000ef error could be caused by hardware or drivers. Please follow the guidance listed below:

Another common possible cause is that there could be bad disk blocks. If there are bad sectors in your hard drive, Windows stop code Critical Process Died on startup may happen. In this case, you need to check whether there are bad sectors in your disk.