Buy 5 Ton Ac Unit [2021]
Still, there are spells during the long northern winters when it just makes sense to have traditional electric coil heating available as a back-up. All our units have electric coil heating either built-in or they can be fitted with electric coil heat. The electric coils range in size from 5 kilowatts to 25 kilowatts.
buy 5 ton ac unit
Saving energy save you money, and our 5-ton heat pumps with 16 SEER ratings are examples of energy efficiency in all of its glory. SEER stands for Seasonal Energy Efficiency Rating, and most of our units rate 15 SEER or higher. This is good for the environment and good for your budget, and ensures compatibility with state energy usage standards in all 50 states.
Note: These are basic AC units. A 14-16 SEER, single-stage air conditioner is the least expensive you can find. That is why pricing in this table is lower than the central air conditioner prices found in the table above showing the total range of models from the least efficient to most and including 1-stage, 2-stage and variable capacity air conditioners.
The AC cost per ton goes down as the unit gets bigger. What changes as the unit gets larger? The coils, rated in tons, get bigger. So does the compressor. And more refrigerant is needed to charge the system.
A 10 ton commercial ac unit price ranges from $18,000 to $37,000 installed, for example, depending on the efficiency and features the system offers. That includes labor, multi-zone controls/thermostats, ductwork changes and system setup and testing.
You can get a 4 ton AC installed for less than $6,000. That cost includes the outdoor condensing unit, indoor evaporator coil, refrigerant line set, refrigerant charge needed to fill up the system and other installation supplies.
The 3 ton AC unit cost ranges from $5,400 to $10,800 for most brands when all options are considered from 14 SEER to 24 SEER and single-stage cooling and variable-capacity cooling. The Tables above include ranges for basic air conditioner units, not high-efficiency models.
The 5 ton AC unit cost for all efficiency and performance tiers is $6,200 to more than $12,000. These are installed costs that cover all brands from Goodman ($-$$) to Rheem and Heil ($$-$$$) to Trane, Lennox, Carrier and other premium brands ($$-$$$$).
Efficiency plays a big part in the cost of a new HVAC system and is worth considering when setting a budget for a new HVAC replacement. For example, a gas 3-ton 14 SEER new HVAC installed cost $7,670 while a 22 SEER AC unit cost $16,116. As you can see, a 22 SEER replacement costs more than twice as much as a 14 SEER, so I recommend looking into the pros and cons of high seer ratings early on in the buying process.
The temperature and humidity difference between each region in the US can change the size and type of HVAC system available to you. If you are in the southeastern states, you will need a lot bigger air conditioning unit to handle the heat. The northern states require huge furnaces to handle the long cold winters. The southwestern states with low humidity have different options for cooling by adding moisture back into the air.
Load calculations drive the size of the furnace and air conditioning unit needed for your home. Some calculations take into consideration the size of your home, ceiling height, and how well insulated your home is. These variables help determine the extent of heating and cooling you need for your home. The next set of variables looked at is the outdoor to indoor temperature splits. The temperature splits in southern states will be around 20 degrees in the summer and 30 degrees in the winter. For example, if temperatures reach 95 degrees, the air conditioner will keep inside your home at 75 degrees. A 15-degree split is needed for the summer in northern states, but a 55-degree split is necessary for the winter. For this reason, southern states need much larger air conditioner units but smaller furnaces than what is required up north. The big difference in cost primarily comes from the technology needed per region of the US. Southeastern states can use a heat pump to cool or warm homes, but a gas or oil furnace is necessary up north. A gas and oil furnace costs more than a heat pump, mainly due to the number of safety features required.
When you choose Day & Night heating and cooling equipment, it means your home comfort is backed by superior engineering and quality manufacturing so you can enjoy more important things. Each unit is 100% run tested, and we design our products to give you the best in quality, energy efficiency and reliability. We take pride in delivering high efficiency and inNovative design that exceeds your expectations for comfort every hour, every season.
Depending on the unit you purchase, there may be additional items needed for your AC install. To avoid any surprises, we appreciate the opportunity to clarify the difference between recommended and required upgrades you may be offered by your install contractor.
Please keep in mind, your assigned contractor will go over RECOMMENDED upgrades to enhance your system at the jobsite inspection. If you choose to purchase any of the recommended items, they will be sold to you by your contractor, not newACunit.com and will require an additional fee. You are not obligated to purchase any additional items you do not want to. In the conventional buying process, all contractors include additional upgrades with the unit that is being sold to you. Oftentimes, those upgrades are not the reason your AC unit failed. At newACunit.com, we leave you in control of your budget.
REQUIRED upgrades are items you must purchase before installation to ensure your new AC unit will function properly. Your assigned install contractor will go over any additional items needed at your jobsite inspection.
Required upgrades may include: a 2-stage thermostat for your unit to be able to run in the 2nd stage, structural changes, safety hazard fixes or replacement of items that may prevent the system from functioning properly.
How difficult is installation in an RV? EasyStart mounts inside the rain shield on a rooftop unit. The wires are run to the electric box and connected to four points in the box. We have many wiring diagrams available for rooftop units and in some cases complete installation guides. Although most customers install EasyStart themselves, a few opt to have it installed by their RV dealer, HVAC technician or electrician.
Trane XR14 Series 5 Ton 14 SEER 56000 BTU 4TTR4060L1000A air conditioner condenser unit is an efficient solution to your home air conditioning needs. This 5 Ton outdoor air conditioner includes the highly reliable and efficient ClimaTuff Scroll Compressor that works quietly, thanks to the Spine Fin Coil. The coil also helps increase the efficiency of the unit and makes it a perfect companion for your heating unit at home.
To fight against corrosion and rust, this XR14 5 Ton Air Conditioning unit has WeatherGuard fasteners & a DuraTuff base pan. To wrap it off, the 4TTR4060L1000A AC condenser unit has full-slide louvered panels that keep all the internal parts protected inside.
This 5 Ton air handler is compact and thus can be set up in a utility room, attic, closet, basement or crawlspace. And of course, this 14 SEER Air Handler unit will work with both air conditioners and heat pumps. Besides, the cabinet of this 5 Ton 14 SEER air handler model TEM4A0C60S51SB is painted to avoid any rust or corrosion related damage.
Central air conditioning keeps your home cool no matter how hot it gets outside. Central air uses the same ducts that can carry heat through your home from a forced hot air furnace and is the most common method of cooling the home with a 5-ton unit. The systems work by condensing the outside air and cooling it with refrigerant before forcing it through the ducts to the various rooms of your home. They come in a few different types of systems, including those that can be packed with a furnace. For those that live in large homes of over 3,500 sq.ft., you need a 5-ton air conditioner to cool the space, regardless of type.
The national average cost to install a 5-ton AC unit is $7,000 to $12,000, with most homeowners spending around $10,000 on a 5-ton split system installation with a SEER rating of 16 and a new concrete pad. The low cost for this project is $6,000 for a 5-ton split system installation with a SEER rating of 13 and no changes or modifications to the area. The high cost is $15,000 for a packaged HVAC unit installation with a SEER rating of 21, with moderate modifications to the ducts.
If you have a home over 3,500 sq.ft in size, you need a 5-ton AC unit to cool it properly. 5-ton units produce roughly 60,000 BTUs. They come in different efficiencies from 13 to 21, with 13 being the lowest and 21 being the best efficiency possible. Higher efficiency ratings mean lower monthly costs but cost more upfront. These systems come in three types. Split systems are the least expensive and most common. Packaged systems are best for cramped spaces. Packaged HVAC systems combine a furnace with the AC and are the most costly to purchase and install. Below are the average costs for installing a 5-ton AC unit of varying qualities.
In addition to the type of AC unit you purchase and its efficiency rating, other things impact the total cost of your project. AC units sit on a concrete pad 1. If you need one installed, this increases the cost of the project. In addition, sometimes modifications need to be made to existing ductwork to add an AC unit to an existing furnace system. In either of these scenarios, your costs can be higher than if you use your existing setup without any modifications or changes.
5-ton AC units are excellent at cooling large spaces, but they do not produce heat on their own. If you live in a warm climate and do not need a forced hot air furnace, you could install a heat pump at the same time as your AC unit to provide some degree of warmth. Heat pumps are installed separately from the AC unit because they work differently and distribute the air in two different ways. The cost of installing a heat pump ranges from $5,000 to $30,000, depending on the type, plus the cost of the AC, which averages $7,000 to $12,000 for a total cost range of $12,000 to $42,000. 041b061a72